MSPC flooring---High Glossy flooring
--Our new arrival series for you
--just like the marble
--Melamine Stone Plastic Composite
--most rigid
--high wearproof with AC5
--super anti-scratch
--100% virgin material
All the floor surfaces can be produced into any sizes that listed above.
Installation Areas: Below,on,or Above Grade
Compliance: CARB Compliant
CAPACITY FOR DIFFERENT PRODUCTS
| size | capacity/one line per day | weight/one line per day | square |
| 1220*180*4*0.3mm | 1*20GP | 25T | 3000m2 |
| 1220*228*5*0.5mm | 1*20GP | 25T | 2400m2 |
| 1520*180*4*0.3mm | 1*20GP | 25T | 3000m2 |
| 1520*228*5*0.5mm | 1*20GP | 25T | 2400m2 |
| 1520*228*6*0.5mm | 1*20GP | 25T | 2000m2 |
ZETA'S Standard and Technical Specification
| ZETA Floor Standard and Technical Specification | ||||
| Item | Specification/Standard/Certification | LVT | MSPC | |
| Technology | Production Method | Hot Pressing | Hot Laminating | |
| Appearance | Surface Treatment | / | Texture / Embossed / Crystal / MAT /EIR,etc. | |
| Wearlayer | / | 0.1mm - 1.0mm | ||
| Thinkness | EN428 | 1.5mm - 5mm | 3.2mm-6.5mm | |
| Edge | / | V-groove / Micro V-groove ( on wearlayer ) | ||
| Underlayment | / | Anti-sliding layer | EVA / IXPE / Cork | |
| Available Size | / | 6"x36"/48" , 7.25'x36'/48"/60" , 9"x48"/60"/72" | ||
| Quality | Density | EN436 | 2000g/m³±100 | |
| Size Stability/High Temperature Shrinkage | EN434/SGS | Dry back : 0.2% | ≤0.08% | |
| 100% virgin : 0.1% | ||||
| Size Stability/High Temperature Warped | EN434/SGS | Dry back : ±2.0mm | ±1.0mm | |
| 100% virgin : ±1.5mm | ||||
| Peel Strength | EN431 | Wearlayer≤0.12mm : ≥38N | ≥70 | |
| (N/50mm) | 0.12mm≤Wearlayer≤0.55mm : ≥55N | |||
| Click Tension | EN684 | ≥145N/50mm | ≥175N/50mm | |
| (N/50mm) | ||||
| Light Fastness | ENISO 105 B02 | ≥6 | ||
| Heavy Metal | SHA19-100142.001 | PASS | PASS | |
| Formalldehyde | ISO16000/SGS | PASS | PASS | |
| VOC Emissions | ISO16000/A+ | N/A | N/A | |
| Staining Resistance | EN423:2001 | N/A | N/A | |
| Scratch Resistance | ISO 1518/SGS | ≥3000g | ≥3000g | |
| Impact Resistance | ASTM F1265-03a | N/A | N/A | |
| Flam resistance | EN9239-1/SGS | Class B1-S1 | Class B1-S1 | |
Warranties: Lifetime Residential Wear
Lifetime waterproof
Lifetime Structure
10 Years Commercial Wear
In-Floor Radiant Heat:
PVC flooring can be installed over radiant heat using the floating or glue down method.
When gluing floor,use only FNLS recommended multipurpose adhesive over manufactuer's
Recommended substrate.
Turn the heat off for 24 hours before, during and 24 hours after installation when installing over
Radiant heated subfloors.
Failure to turn the heat off may result in significantly shortened working time of the adhesive
Floor temperature must not exceed 30°C
Once the installation has been completed ,the heating system should be turned on
and increased gradually(5 degree increments) until returning to normal operating
conditions.
Failure to strictly follow adhesive manufacturer's guidelines may result in failure
And void the warranty.
Warning: Electric heating mats that are not embedded into the subfloor are not recommended for use underneath FNLS.Using electric heating mats that are not embedded and applied directly underneath FNLS could void the warranty for your floor
In case of failure. It is best to install FNLS over embedded radiant floor
Heating systems and adhere to the guidelines listed above.
